How Much Does Washing Machine Repair Cost?

Highlights

• The average cost range for washing machine repair is $50 to $450, with a national average cost of $180.
• Some of the main factors that affect washing machine repair cost include the type of washing machine, the type of problem, the type of repair, the brand of washing machine, and the cost of labor.
• There are several signs that suggest a washing machine needs repair, such as unusual noises, water leaks, unpleasant smells, unclean clothes, excessive vibration, failure to spin, and a drum that’s not filling or draining.
• When it comes to washing machine repair, it’s best to leave the work to the professionals because the repair may involve working with plumbing and electrical.

A broken washing machine can ruin a well-planned day of cleaning clothes. Those piles of dirty dishrags and teenage gym clothes can only wait so long before odors spread through the house. Fortunately, washing machine repair costs are cheaper than full replacement. According to Angi, most broken washing machines can be repaired for an average cost of $50 to $450, with most homeowners spending around $180.

The average cost of washing machine repair will depend on what part is broken or the extent of repairs necessary. Typical repairs include replacing the door, broken controls, the pump, the drum, or even the timer. The cost will also vary depending on the labor rates in the home’s geographic area, which can average between $50 to $150 per hour. This article breaks down the most common types of washing machine repairs, their associated costs, and what customers can expect from a professional washing machine repair service.

Factors in Calculating Washing Machine Repair Cost

No matter the type of washing machine, when a repair is needed it’s important for customers to understand the different factors that influence washing machine repair costs. Some repairs are less complicated than others, which means customers will pay less to repair a lid switch than to replace a broken clutch. Despite the variety of parts and repairs, it’s rare to pay more than the average cost of $50 to $450. Still, it’s best for customers to be prepared with as much information as possible about the most common factors that influence the cost to repair a washing machine.

Washing Machine Type

The type of washing machine someone owns will greatly affect the repair price. There are three main types of washing machines, each with a slightly different average repair cost, including labor.

Most washing machines are manufactured under one of these three styles. However, those that employ alternative cleaning methods come with different repair costs, such as semi-automatic washers (which can cost between $100 and $250 to repair) or steam (which can cost between $250 and $450 to repair). The more complicated the type of washing machine, the more expensive the cost of repair.

Problem Type

Though it’s a straightforward process to wash clothes by hand—the old-school way—washing machines are much more complicated tools. The types of problems one might encounter with a broken washing machine may include the following.

• Leaks
• A door that won’t shut
• Buttons that won’t work
• Cycles that won’t run
• A drum that won’t spin
• Banging sounds in the drum
• Water not getting in or out properly
• Motor not working at all

Just as a more complicated washing machine will cost more to repair, so too will complicated problems. For instance, if the pump has gone out, customers can expect to pay nearly $400 for parts and labor. Repairs for less complicated problems, such as an inlet valve that isn’t letting water into the tub, typically cost around $160.

Repair Type

With luck, the problem a resident is experiencing with their washing machine is simple and uncomplicated. If not, the washing machine repair cost will increase with every part that needs to be purchased. Older washing machines might have discontinued parts that are hard to find, thus increasing the cost as well. Examples of types of repairs and parts for a washing machine may include bearings, belts, timers, drums, coupling, control boards, door locks, and lid switches.

The costs of these types of parts can range from $10 to $300 before labor.

Washing Machine Brand

Many people are loyal to certain brands for appliances, TVs, phones, and so on. And certain appliance brands come at a higher price, which often means a higher repair cost as well. Still, products from some of the most expensive brands, like Bosch, are manufactured to outlast their competition. For those who are considering which washing machine brand to buy, here are some of the most common brands and their average repair costs.

Labor

When calculating the cost of local washing machine repair, customers will want to make sure they consider labor costs, which can vary depending on location. The average cost of washing machine repair labor is $50 to $150 per hour. This cost might not include a trip fee for the technician to travel to the customer’s home or an after-hours or emergency service fee. Customers will want to ask about these costs when they call for a quote.

Additional Costs and Considerations

Aside from the most common washing machine repair costs, there can be other costs that may or may not apply to a particular situation. Customers may need to consider replacing the washer rather than repairing it. There could be additional fees or discounts for them to ask about, in addition to possible warranties that may apply.

Repair vs. Replacement

The question all customers will eventually have to ask is whether it’s time to simply replace a broken-down appliance based on how long washers and dryers last. While most washing machines last about 10 to 14 years, one could experience a manufacturing problem that necessitates its replacement before then. There are two rules that can be followed when considering whether to repair or replace a washing machine.

• If the repair costs 50 percent or less than the cost of a new machine, repair is likely the best route to take.
• Washing machines that are 5 years or older and require frequent repairs likely need to be replaced.

Emergency Call-Out Fees

Fortunately, most washing machine problems won’t be an emergency since the user can simply stop using the machine. Leaks will typically stop when the power to the appliance is turned off. On occasion, a leak might not stop and an emergency service might be needed. In that case, customers can expect to pay an additional fee of about $100 to $200 on top of the labor and parts.

Warranties

Most washing machines from the top brands come with manufacturer warranties. These typically cover basic repairs, parts, and sometimes labor costs. This drastically reduces a customer’s out-of-pocket cost. Sometimes an extended warranty is available at the time of purchase and may be a wise investment up front.

Discounts

It never hurts to ask about discounts. And that rule especially applies to asking about discounts on any major expense, such as an appliance repair. When a customer calls for a repair quote, they’ll want to ask if there are discounts for certain categories of people such as first responders, military members, or seniors. The repair company might also be running a special discount on social media or by direct mailer, so customers will want to check for these to see if they’re available and sign up, if necessary, before they call to schedule a repair.

Washing Machine Repair Cost by Type of Repair

At this point, it’s no surprise that washing machine repair costs are highly dependent on the type of repair needed. Whether the washing machine is not spinning or the user can’t get the buttons to work properly, the repair costs will average $180 but could cost as much as $450. Customers will want to review the most common types of washing machine repairs and their associated appliance repair costs while budgeting for the repair.

Belt Repair

The belt is what keeps the drum moving with the motor. When it wears out, stretches, or breaks, residents will hear a squealing sound or even smell a burned odor. It’s a common culprit when the drum won’t spin anymore. Washing machine belts typically cost $14 to $45 for the part but $140 to $150 to replace with labor included.

Clutch Repair

The parts on a washing machine sound a lot like the parts of a car: belt, hose, motor, and clutch. No matter where the clutch breaks, it’s going to fall on the higher average cost of repairs. Customers can expect to pay at least $250 for parts and labor to repair the clutch. A broken clutch is another common reason a drum only spins when it’s empty, clothes come out extra wet, or it’s not possible to hear the motor when an empty test cycle is being run.

Coupling Replacement

A coupling needs replacing when the opposite problem from above happens: the washer isn’t spinning but the resident can hear the motor running. It may sound like a major problem, yet it’s more simple than repairing the clutch or drum. Customers can expect to pay an average of $90 to $150, including parts and labor, to repair the coupling.

Door and Lock Repair

For obvious safety reasons, washers won’t work unless the door closes securely. When the door or lock breaks, it’s a necessary fix that costs about $110 to $280. Washing machine door lock repair cost typically maxes out at $150, most of which goes toward labor since the parts only cost between $20 and $80.

Drain Hose Repair

It seems like a simple piece of equipment, but a drain hose might cost between $130 and $250 to repair. The hoses for a washing machine cost only $20 to $50, so most of the total price is labor. Since this is the part that carries the wastewater to the sewer, it’s essential that it’s repaired properly. A drain hose can’t always be patched, so replacement is usually necessary.

Drum Bearings Replacement

One of the most important parts on a washing machine is the drum bearings. In theory, they should last about 10 years, but if they fail, users will hear odd crashing sounds coming from their washer. Replacing them will cost between $150 and $200, including labor. It’s important for customers to get this problem fixed quickly so it doesn’t cause further problems.

Drum Replacement

One of the most expensive washing machine repairs is replacing the drum. Sometimes it’s worth replacing the washer if the drum repair will be too costly. Drums can leak or come with a manufacturing defect. Washing machine drum replacement usually costs $350 to $550, though some estimates put it as high as $800. The drum is about half of that cost, with labor making up the rest due to the complicated nature of the repair.

Gasket Repair

The gasket is essential for keeping the water inside the washing machine. When it cracks or is contaminated with mold, it’s time to replace it. Customers can expect to pay an average of $230 to $300 to repair the gasket. Keeping it clean and dry will help extend its life and avoid this more costly repair.

Inlet Valve Replacement

Sometimes the valve that controls the water going into the washing machine breaks or gets clogged. Users might see the drum being filled too much or too little, or they could see leaks coming from near the valve. The average repair cost is $160, and it can be done relatively quickly.

Lid Switch Repair

If the washer door is closing and locking properly but the washer still won’t turn on, it’s possible that the lid switch has broken. It’s the sensor that tells the control board that it’s safe to turn on the washing machine. A lid switch is one of the less expensive types of repairs at $85 to $160 since it’s a relatively simple fix.

Motor Repair

Just like a drum replacement, a motor repair is a costly expense. Customers will need to consider whether it’s worth replacing the entire washing machine. The cost of a motor repair averages $320 to $400. It’s possible that only the coupling or carbon brushes (which transmit electricity to help the motor move the drum) need to be replaced (at a lower cost), so customers will want to get a second opinion if they’re not ready to buy a new washing machine.

Pressure Switch Replacement

A less common type of repair is replacing the pressure switch. This is what controls how much water is allowed in the drum during wash cycles. If this pressure switch stops sensing, the washing machine won’t turn on. This repair requires specialized tools, so it’s best done by a pro at an average cost of $120 to $250.

Pump Replacement

Sometimes a washing machine tub won’t move but the user can tell that the agitator is moving. This could be accompanied by an active leak or a tub that won’t drain. Though those seem to be conflicting problems, they can both stem from a problem with the pump. If the pump needs to be replaced, customers can expect to pay between $300 and $400. The part is relatively cheap at $30 to $40, but labor will be the biggest expense.

Shock Absorber Repair

If the washing machine is shaking, it’s probably because of a broken shock absorber. There are usually two or four shock absorbers that keep the washer stable through the spin cycle. If one goes out, it’s best to replace the corresponding pair. Replacing both will cost about $120 to $250.

Timer Repair

One of the conveniences of modern washing machines is their ability to run short or long periods of time, depending on the type of cycle or level of cleanliness. When that timer stops working, it’s both inconvenient and the problem is sometimes difficult to detect. The cycle may end early, or the washer may skip cycles altogether, but this is hard to notice if the residents are not around while it runs. Repairing a broken timer usually costs between $120 and $230.

Transmission Repair

The transmission is the element that ensures the washer moves from one cycle to the next and also controls the speed. When it breaks down, a whining sound can usually be heard, along with the smell of something burning. Depending on the brand, a new transmission could cost between $100 and $350, including labor.

Do I need washing machine repair?

Many people take washing machines for granted when they work properly—right up until unusual or annoying things happen. If one starts to notice odd sounds and odors, leaks, or a water-filled drum, it’s time to call in the pros. Some problems are straightforward, but others could be masking additional problems that require special tools to repair. It’s possible to use the common problems described above as a guide to know when it’s time to call a local repair service for a misbehaving washing machine.

Unusual Noises

Heavy bedding or clothing can sometimes cause the drum to spin out of balance and bang loudly. In this case, users will just need to redistribute the items before continuing the cycle. But if they hear banging sounds like metal on metal or any kind of squealing, grinding, or whining, they likely have a bigger problem on their hands. It could be anything from a worn-out belt to broken drum bearings that need replacing.

Water Leaks

No matter how well they’re built, washing machines can be prone to leaks. If a little water is spotted on the floor during or after a wash cycle, it’s a good idea to try to identify where the source is. The problem could be as simple as an inlet valve replacement or as complicated as a cracked drum or broken pump. Either way, a professional repairman has the experience to properly diagnose the problem and repair it.

Unpleasant Smells

Where there is water, there is always a chance for bacteria or mold to grow. It’s important for users to keep the door gasket clean and dry to avoid a buildup of mold that can cause clothes to smell even after they’ve been washed. Other sources of moldy smells could be a persistent leak that can’t be seen.

If users are smelling a metallic scent or something more like burned rubber, then there’s a more serious issue afoot. The belt may have worn out or the transmission may be failing. Both are critical repairs necessary to keep the washing machine in working condition.

Unclean Clothes

The point of a washing machine is to clean clothes. If users notice their clothes are almost as dirty as when they went into the drum, there’s a problem to address. The washing machine might not be completing a full wash cycle due to a faulty timer, a broken pump or motor, or even a misbehaving pressure switch. Users will want to take note of the cycle they were running, when it stopped, and if there were any unusual sounds or smells. This can help the repair technician diagnose the issue more quickly.

Excessive Vibration

Washers should shake a little bit as the drum spins furiously to shed excess water. The shock absorbers take most of the vibration, but when they wear out, the washing machine could shake excessively. Not only do these make a washer less obnoxious while it runs, they also keep the parts from banging into each other excessively. Customers will want to call in a pro to repair the shock absorbers to prevent further damage.

Failure to Spin

Sometimes a sensitive washing machine won’t spin if the user has loaded it too full or it’s spun out of balance. In this case, the load can be adjusted and the machine restarted. If this doesn’t solve the problem, then it’s likely a broken belt, lid switch, coupling, or pump. The repair might be costly, or it could be relatively inexpensive.

Drum Not Filling or Draining

The most common reason a washing machine isn’t filling with water or draining is a problem with the inlet valve. This controls the flow of water, so if it’s clogged or broken, then the home’s residents will have problems related to the washing machine. Additionally, it could be the pressure switch, which is the sensor that controls the amount of water going into the drum. A pro will be able to diagnose the part that’s causing the problem and resolve it.

Washing Machine Repair: DIY vs. Hiring a Professional 

Washing machine repair costs aren’t as expensive as many other household repairs. Still, unexpected repair costs can be frustrating, and it can be tempting for users to DIY the repair themselves. The challenge with washers is that they have so many unusual parts that are put together in a relatively small space. This makes it challenging for anyone except an advanced DIYer to tackle nearly any washing machine repair.

It’s also not the safest option since both water and electricity are used in the same unit. A simple mistake can become dangerous. It can also become costly if the DIYer ends up damaging another part while attempting a DIY repair. If the washing machine’s warranty is still valid, a DIY repair could nullify it and the repair could end up costing more in the end.

The best thing one can do is to troubleshoot as much as possible before calling in a pro. This can reduce the pro’s diagnostic time (and overall hourly billing) and help ensure they bring the right part when they come. Another option is for the customer to order the part they need from a generic manufacturer at a cheaper price than the often-marked-up cost from the service technician. This needs to be done cautiously and only if the user truly understands what parts fit their model.

But who fixes washing machines? Overall, the safest and wisest choice is to call one of the best appliance repair services. They have the tools, expertise, and licenses to properly diagnose problems, identify other worn-out parts, and help customers with warranty claims or recommend a replacement. It’s also in a customer’s best interest for safety reasons to let a professional handle any kind of repair for a problem that began with a burning smell since that could include electrical work.

How to Save Money on Washing Machine Repair Cost

No one likes to have to spend money on repairs, yet it’s a necessary cost of homeownership. Consider these money-saving tips when planning for washing machine repair costs.

• Check your warranty. If it’s still valid, it may cover some or all of the repairs. You may need to verify if only certain components are covered.
• Troubleshoot as much as possible. The more detail you can provide the technician regarding what the problem is and when it happened, the faster they can diagnose the problem.
• Care for your washing machine. A little preventive maintenance can go a long way in extending the life of your washer and catching little problems before they become monstrous issues.
• Redistribute your laundry load. Sometimes a problem is only a little human error that can be resolved at no cost.
• Check any visible connections. A leak may not be a huge problem if a hose has simply come loose due to the vibrations of the washing machine.
• Obtain multiple quotes. Get quotes from at least three service companies who do a free inspection to see what the issue is.
• Ask about any additional travel fees. A hidden cost could be travel fees, so ask if those are included in the price or added to the cost of parts and labor.
• Prep for service repair. Since labor accounts for a lot of the cost, do as much prep work as possible before the service technician arrives. Drain the tub, remove clothes, and make the washer easy to access. (Don’t hesitate to ask how to drain a washing machine if you’re uncertain.)
• Ask about discounts. Never hesitate to ask about whether the company offers any discounts for seniors, military members, first responders, and so on.
• Check your home warranty. Many of the best home warranties (like those from American Home Shield or AFC Home Club) include coverage for the cost of repairs for major appliances. Check with your home warranty provider to find out if there is a limit to how many visits are covered (in case the repairman needs to return with another part), if labor is covered, and how long the work is guaranteed for.

Questions to Ask About Washing Machine Repair

The average person may not know how a washing machine works, but they can certainly be prepared with the right questions to ask a service technician. Knowing what to ask can help avoid miscommunication, provide confidence, and save the customer time and money.

• How long have you been in business?
• Do you have references I can speak with?
• Are your technicians licensed and insured?
• Have you worked with this brand of washing machine before?
• Do you offer a free inspection and estimate?
• How much do you expect this type of repair will cost?
• Do you charge any additional fees aside from parts and labor? If so, what are they?
• Can I receive an itemized invoice?
• Do you have this part in stock?
• What happens if your technician identifies additional issues when they inspect my washer?
• How long will the repair take?
• Do you offer any maintenance services?
• Do you offer a warranty for your repairs? If so, how long is the coverage?

FAQs

When spending money on any of the most common appliance repairs, customers will want to gather as much information as possible. Reviewing the answers to some frequently asked questions about washing machine repair can provide customers with additional insights into washing machine repair costs.

Q. What is the average lifespan of a washing machine?

Washing machines should last a minimum of 10 years, but with careful maintenance, they can last as long as 14 years.

Q. Is it worth repairing a 10-year-old washing machine?

Since most washing machines will show signs of wear and tear at the 10-year mark, it’s usually better to consider replacement. Homeowners may still want to consider the type of repair that’s necessary and the cost since they could get another few years out of a sturdy washer. For instance, a cheaper repair like replacing a pressure switch is worth doing. However, things like a broken drum or the need for frequent repairs will indicate it’s time to replace the washing machine.

Q. Why is my washing machine not draining water?

A washer full of water is incredibly inconvenient, but there are some common culprits to investigate. It usually means that one or more cycles did not finish properly due to a broken pump, pressure switch, valve, or even clogged hoses. A repair technician will be able to quickly identify the issue, especially if the customer can explain any details about the problem.

Sources: Angi, HomeAdvisor, Fixr, HomeGuide, Consumer Affairs

 

See All Cyber Monday Sales

Our editors combed through the best early Cyber Monday deals to bring you the most savings on the products you love.

SEE DEALS